From 2021 genuine Crewsaver cylinders are now shorter and wider than originally supplied. This reduces the chance of the cylinder rubbing on the collarbone. Contains exactly the same amount of gas. Consistency wise i run it at 65psi average to keep under the limit and theres about a 5fps variation. Not as good as some have got it, but ok for me. The kit includes one 33g CO2 cylinder and one green clip. Second picture shows the older type manual inflator, there are two different pull cords the other has a round red end. The gun itself feels really solid but is so light! The finish on it though looked rough and dusty so just needed cleaning down after delivery.

Wraith 33g Co2 Adaptor - HIGH PRESSURE AIRSOFT

This is a specially imported genuine manufacturers' part and is very easy to fit in seconds. It has no shelf life. The kit includes a replacement Hammar hydrostatic head, this part is used for replacing date expired operating heads. See video for fitting instructions. The kit includes one replacement bobbin, known as the 'superbobbin' which will fit all Halkey Roberts mechanisms. It's yellow in colour, your old part may have been red.Cylinders should not be used if they are showing signs of deterioration. Such signs could be rust or scarring of the end cap. The kit includes a replacement Hammar hydrostatic head, this part is used for replacing date expired operating heads. I'm using a Balystik reg with mine. Faultless so far (have one for sale on this forum at the mo' as I had two) The kit includes one replacement automatic head, one 33g CO2 cylinder and one green clip 13mm wide. I prefer a dmr over the srs for milsims as I find people are less likely to call a single hit (multicam is especially bullet proof) and you typically come up against several people in groups.

CO2 Cylinder for Lifejackets - RT Supplies Ltd CO2 Cylinder for Lifejackets - RT Supplies Ltd

When skirmish day arrived i couldn't wait to try it and it did not disappoint. The range on this is fantastic, requiring very little hop adjustment (albeit on .25's as thats all i had) The new Halkey Roberts Alpha inflator features and all new 'dog clip' so called because it's easily identifiable. The clip has four legs, a head and body!Glad i bought x2 48ci tanks to be honest. with 35rps this thing gulps air. But no more than every other high RPS hpa engine! It is a factory part and is fairly easy to fit in seconds. It has no shelf life. Comes complete with a key to aid in fitting. The pdik has ended up in an mp5sd which should be interesting as a silent dmr, but may get moved on along with some of my aegs. The kit includes one replacement bobbin, known as the 'superbobbin' which will fit all Halkey Roberts mechanisms. Its yellow in colour, your old part may have been red. Also included is a 38g CO2 cylinder and the relevant clip.

Crewsaver - Marine Warehouse Ltd - Lifejackets

I was lost for words at how light this thing was despite it being 90% full metal. I could give this to a young teenager and they would be able to sport this all day without a problem. Definitely lighter than my G&G Scar-L. This is a specially imported genuine manufacturers part and is very easy to fit in seconds. It has no shelf life. The Hammar MA1 inflator can be recognised by the pull cord which is yellow and different to the standard hammar kit which has a red pull cord. (Sometimes mis-spelt as Hammer.) I have never handled an airsoft weapon of this quality. When they call it a "training weapon" they werent kidding.The Hammar MA1 inflator can be recognised by the pull cord which is yellow and different to the standard hammar kit which has a red pull cord. The post 2009 Halkey Roberts Alpha inflator features a 'dog clip' so called because it's easily identifiable. It has four legs, a head and body!