The beyerdynamic DT 770 PRO headphones have established themselves as a firm favourite amongst music producers, sound engineers and broadcasters and are used in studios all over the world. For mixing and mastering in the studio, open headphones are often used because of the better spatial representation. If you purchased your beyerdynamic product less than two years ago, you still have your purchase receipt, and you have not violated the terms and conditions of your warranty through improper use: Service and repair fees are covered by your warranty.

Related: What's the Difference Between Open-Back and Closed-Back Headphones, and Which Should I Get? You can easily repair it without any tools and replace nearly all the parts yourself, from the cable to the proprietary drivers, which saves you some green in the long run. png Monitoring and recording in the studio ✓ Closed-back (The earcup housings are completely closed so incoming and outgoing noise is attenuated.Also, I have no idea what mods there are for these phones, and was wondering if you can provide explanations or links to these mods, such as the blu-tak mod. If you’re worried about comfort, there’s no need; you can use this for hours without anything feeling off. As it has a relatively typical sensitivity and low-ish impedance, you would only need an amp if you notice your source device can’t output the volume you want to listen to. Now take some cotton balls and pull them apart (more like stretch them out so they aren't really dense).

Your individual anatomy will alter what’s “best” for you, and this will only get you about 90% of the way there. If you’re going to be keeping the DT 770 PRO in the studio, it should be more than adequate for tracking or monitoring. The telltale gray velour ear pads give them away as a Beyerdynamic product, but they look and mostly feel like classic studio-style headphones.Thanks to their meticulous build and sonic quality, Beyerdynamic's DT 770 PRO headphones have become a standard for recording, mixing, and even casual listening with countless professional engineers and musicians relying on them for nearly 30 years. The closed-back design helps you hear what's coming through the headphones, but it also prevents sound leaking from the headphones and into any microphones if you're recording. Perhaps it's because Beyerdynamic is already such a studio staple brand, but looking at these, you're instantly struck with a thought similar to "Wow, they sure do look like headphones. If you’re not going to use this at home, you may want to use some zip-ties or something to rein in that cable, because it’s three meters long—not ideal for mobile use.

This is the most "all around" version of the headphones, but you'll find they still don't work well with phones or laptops.If you’re looking for a cheaper set of cans, you could always look to grab one of the even-older Sony MDR-7506. But you really do need to use a high-quality amplifier or audio interface to get the most out of these headphones.

If a track is properly mixed, you won’t notice this as much, outside of the fact that you can actually hear the cymbal shimmer.While the DT 770 PROs and Beyerdynamic headphones, in general, have a reputation for being slightly sibilant, here, the boosted treble breathes new life into this older recording. first i also thought the driver was broken, but then i found some hair inside, removed it and it sounded fine again. Remove the foam (its re-useable), and then you're at the face of the driver (the middle part is the driver, its not the whole part that you see). I already mentioned the slightly boosted bass from the design, but there is also a bite to the treble that can get out of hand on certain tracks.