T-Cut 3 in 1 Color Fast Paintwork Restorer Car Polish, White, 500 ml, Packaging May Vary

Product Information

Step 1: An important action to ensure you carry out, is to thoroughly clean and dry the area of paint you are applying the T-Cut to, or else it could potentially damage the paintwork. Have you ever walked past your car and done a double-take because you’ve just noticed a scratch? And then you frantically rub over it, hoping it’s just a dirt smudge, but it remains. Where tcut is not suitable, however, is with deeper scratches where it is far less successful, or even places where the car has been dented as well as scraped. It should only be used to rectify light, shallow, surface scratches where T-Cut can be most effective. Keyed car scratches or deep scrapes from a wall or kerb can often be too deep, going all the way down to the basecoat or primer layers of the car paint, for a simple cutting compound to fix. Where this is the case, a stronger method of scratch removal may be needed, and we’ll talk more about this later. How Does T-Cut Work? Of course, no matter how it may not be ideal for deeper scratches, T-Cut is great for that top layer. To apply T-Cut, it is a very simple process.

The T in Tcut stands for “ Tetrosyl Cutting Oil ”. How T-Cut works What is the car scratch remover good for? Yes, by removing cloudiness from clear, plastic headlights, T-Cut can be used to restore headlight clarity, which will then result in the visibility of light to increase. This can also be applied to windows and plastic glass, which will enhance the clearness whilst adding a shine. T-Cut Colour Fast – Removes minor scratches, scuffs and marks, all whilst adding colour, in one simple application. Suitable for all paintwork types, including metallic, this revolutionary paintwork renovator is available in an impressive array of 13 colours. T-Cut Colour Fast not only enriches your vehicle's paintwork, but also cleans, restores, and polishes the surface in a single, easy application, ultimately providing a protective shine that endures.If You Rush It Or Don’t Have Time For The Maintenance: As mentioned in step 4, you should always remove any excess product on the car, as it will be tough to remove any that was left over. Have you found a few scratches on your paintwork that you’re itching to get removed, but don’t have the time or confidence to do yourself? Get in touch with Bodyteq today for a free estimate. T-Cut Metallic Colour Restorer – Less abrasive than T-Cut original, so it is more suited for sensitive paint finishes, specifically for metallic surfaces and pearlescent paintwork. The next step is to put on a pair of gloves and apply tcut to a clean cloth – something without fluffy fibres. The reason for this is the fibres can break off into the T-Cut solution, and this can also mark the paint. Applying T-Cut There are other cases where applying tcut yourself, or trying to repair the scratches yourself, are not recommended. If you are unfamiliar with repairs

Yes, T-Cut can be used to improve headlight clarity and light visibility by removing haziness from clear, plastic headlights. It can also be used on window and plastic glass to improve clarity and add shine. To do so though, ensure you buy the right version of T-Cut. Coloured versions will not help with restoring headlights, for obvious reasons. Can it remove excess lacquer?

ChipsAway specialists are experts in car scratch repair. We have a unique and fully mobile paint matching system they use means that, not only are you removing the scratch, but repainting it with the correct, precisely mixed colour and finishing it with the same lacquer seal as before. As this process restores the damaged area, there is no need for time-consuming waxing afterwards. Step 3: Rub the T-Cut over the scratch with a steady and firm hand, ensuring you move the cloth in a circular motion. Do not be alarmed if your clothes change colour, as it is only due to the top layer of paint coming off.

Customers have had varied experiences with the T-Cut Colour Fast 3-in-1 Paintwork Renovator. While some have reported that it did not effectively hide light scratches on their vehicles, others found that it considerably reduced fine line scratches. It is essential to apply the product in a small area and buff it off as you go, avoiding direct sunlight to prevent rapid drying. This process can be applied to a small area of a car, such as a wheel arch, or it can be applied to much larger surface areas. If the latter is the case, then tcut will need to be applied all over, one panel at a time, and will requires several containers of tcut to ensure you have enough of the compound. If, for instance, you want to restore an old paint job all over a car, the process is the same as with a smaller area, but it is a more laborious job. Every panel will need to be treated, one panel at a time, to ensure an even application. The maintenance afterwards will also be more intensive, since the car will regularly need to be waxed all over. T-Cut After Care Step 4: After rubbing until the scratch is no longer visible. You should use a second clean microfibre cloth to wipe away any remaining solution. The first thing to remember when “T-Cutting” a car is to ensure the paint is completely clean and dry, otherwise, you run the risk of damaging the paintwork when you start polishing it down. Cleaning the surface of your car is incredibly easy and can be done by either running the entire car through a car wash, or thoroughly cleaning and drying the car by hand. Here at ChipsAway we are experts in car scratch repair, and we can repair scratches that tcut usually won’t touch. Our speciality is offering an affordable and convenient service that gets your car sparkling in no time. With experts positioned and poised up and down the country, we have specialists near you. Free, No-obligation Repair EstimateT-Cut Original Colour Restorer – Formula that restores the original colour and shines to paintwork.

It’s vital that all excess fluid is removed before finishing the job. If too much is left on, or the incorrect colour has been applied to scratches, it can be extremely difficult to remove. Applying T-Cut is a time-consuming process and requires additional care afterwards. If the application of T-Cut is rushed then it can lead to more expensive repairs later on down the line. Common Questions Is T-Cut safe? Next comes the application. Working in a circular motion, rub the solution over the scratched area, applying firmly to ensure it gets into the grooves of the damage (especially with coloured T Cut). In many cases, the cloth changes colour as the top layer of paint is removed. Don’t worry, that is perfectly normal although it is not the case with metallic finishes as the lacquer on these is clear.

How T-Cut works

T-Cut Polish – Removes surface oxidation, minor scratches and blemishes, whilst providing a shiny finish to your paintwork. The T-Cut Colour Fast collection offers a remarkably straightforward solution for cleaning, restoring, and waxing your vehicle. Perfect for most paint finishes, T-Cut Colour Fast utilises cutting-edge polymers, pigmented resins, and wax technology to effortlessly eliminate surface oxidation, blemishes, and minor scratches, leaving behind a long-lasting, deep gloss shine.