Shelly 20210 EM Schalt-Messaktor Wi-Fi

Product Information

Generation 1 “Shelly 4Pro” and “Shelly Sense” are not supported (devices based on old CoAP v1 protocol)

Shelly EM - fuse-box Home Assistant Energy Monitoring with Shelly EM - fuse-box

With Shelly EM, you can view the quality of your electricity network regarding active power, reactive power, voltage, and power factor. Monitor your facility or home to avoid additional expenses or drastic drops in energy that may damage your appliances and machines. Projects Shelly Power Consumption Alarm Signal Observe a chart with the Shelly Device maximum and minimum voltage displayed in Volts (V). Above the voltage chart, you can select the time interval and the date from which you want data to be shown. If Home Assistant is running as a virtual machine or service on an operating system other than Home Assistant OS, you should open UDP port 5683 on the device’s firewall and/or ensure that communication from this port is redirected to the Home Assistant service. On the Home Assistant user interface, I added a new tab for the loft power sensors and added each sensor with the following code: type: entities Observe the Shelly Device total power in Watts (W), overall consumption in kilo-watt-hours (kWh), voltage in Volts (V), current in Amps (A), and power factor (PF). Below these measurements, observe a consumption chart, in Watt-hours (Wh), of the Shelly Device in the last 24 hours.value_template: "{{ ((states('sensor.shelly_loft_workbench_apparent_power')|float) / (states('sensor.shelly_loft_workbench_line_voltage')|float))|round(2) }}" Change the current device name. This will reflect on the device name in the application if the “Sync name” application setting is enabled. Channel name With most of the main household appliances and computers being monitored in Home Assistant, this only left our loft workshop without any energy monitoring. Depending on how a device’s button type is configured, the integration will create binary sensors corresponding to those inputs. binary sensors are not created when the button type is momentary or momentary_on_release, for these types you need to use events for your automations. Binary input sensors (generation 2) Shelly Pro EM-50 can be accessed, set up, and monitored remotely by the User, as well as the Device can access and communicate with an automation system, as long as they are in the same network infrastructure.

Shelly EM Power Logging with Home Assistant - Brian Dorey Blog Shelly EM Power Logging with Home Assistant - Brian Dorey Blog

If Channel Name is set in the device, the integration will use it to generate the entities’ name, e.g. Kitchen Light

The Device reports accumulated energy as well as instantaneous voltage, current, active, and apparent power per phase in real time. It stores data in non-volatile memory that can be retrieved for a period of up to 60 days in 1-minute intervals. There are two generations of devices. Both generations are supported by this integration. There are some differences in how devices should be configured and in the naming of entities and devices between generations. Shelly device configuration (generation 1) Sunset / Sunrise: The Shelly device may turn on/off automatically at sunrise/sunset, or at a specified time Before/After Sunrise/Sunset. Select the time in hours and minutes from the dropdown menus. Shelly generation 2 devices running firmware 0.12 or later can act as a Bluetooth proxy for advertisements. Active or passive listening can be enabled in the options flow. Options value_template: "{{ ((states('sensor.shelly_loft_workbench_real_power')|float ** 2) + (states('sensor.shelly_loft_workbench_reactive_power')|float ** 2))|sqrt|round(2) }}"

Shelly EM - Shelly UK

If you can’t find the CoIoT peer settings in the device’s web panel, it’s probably using an ancient firmware version, and you should update it to the current one. Earlier this month, we added a Sonoff POW R2 smart switch with power monitoring to our washing machine to enable power logging in Home Assistant and to add notifications when a wash has finished. value_template: "{{ ((states('sensor.shelly_loft_workbench_real_power')|float) / (states('sensor.shelly_loft_workbench_apparent_power')|float))|round(2) }}" If Device Name or Channel Name is set in the device, the integration will use them to generate the entities’ name.If the Input Mode of the switch connected to the device is set to Button, the integration creates an event entity for this switch. You can use this entity in your automations. Events We have a small fuse box with two RCBO (Residual Current Breaker with Over-Current) breakers which power the reflow oven and solar thermal pump on one RCBO and the workbench, air compressor and computers on the second RCBO. value_template: "{{ ((states('sensor.shelly_loft_ovenandpump_apparent_power')|float) / (states('sensor.shelly_loft_ovenandpump_line_voltage')|float))|round(2) }}" Always be notified and monitor your power consumption with Shelly EM, so your power counter never cuts-out your electricity. Yellow light if in STA mode, and connected to a Wi-Fi network. Not connected to Shelly Cloud or Shelly Cloud disabled.

Shelly 3EM - Shelly UK

To add the new sensors to the new Energy Dashboard, you need to create template sensors with the name starting with "energy". Each template sensor also requires additional attribute templates: attribute_templates:If you think your Shelly devices are working correctly and don’t want to change your network/configuration, you can ignore the repair issue. Still, you must know you are giving up the best experience of using first-generation Shelly devices with Home Assistant. For battery-powered devices, the update platform entities only inform about the availability of firmware updates but are not able to trigger the update process.