V23074-A1001-A402 12V 4PIN PA66-GF25

Product Information

Thus, after the treatment, the size of the undried parts expands to be much closer to the nominal size.

It can also be seen that the fibers were elongated along the tensile direction, bearing most of the tensile force until the fibers break. Influence of flow restriction on the microstructure and mechanical properties of long glass fibers-reinforced polyamide 6. New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging .Annealing effect on crystalline structure and mechanical properties in long glass fibers reinforced polyamide 66. If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag.

Its North American headquarters is in Meridian, Colorado, though the postal designation of nearby Englewood is used in its mailing address.To satisfy the relatively high dimensional accuracy requirement, a “supporting mold” was used to compensate for the difference between the transverse and longitudinal linear shrinkage of the PA66-GF25 FR (RP). The influence of environmental conditions on the dimensional stability of components injected with PA6 and PA66. The central hole diameter of the plate by the three routes: (a) DDT, undried parts, (b) DDT, dried parts, (c) DDL, undried parts, and (d) DDL, dried parts. After the injected plates are naturally cooled, the initial properties of the plate are obtained through experimental tests. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing.